SuperPole™ with SuperBar™ Transfer Pole

There are 8 locking positions around the SuperBar - one very 45 degrees. The spring ring is used to stop the set screws from backing out once they have been installed.

The load rating of the SuperPole with SuperBar is based on the user’s weight, but the product is not intended to support entire full body weight. Our research has shown that the amount of lateral force generated by an individual pulling from a sit to stand position will be considerably less than the individual’s weight (i.e. during a sit to stand motion, a person would typically exert a lateral force of 5-30% of their actual weight). This force range is provided as a guideline for typical use and capacity. For most applications, the SuperPole is held in place by jackscrew expansion between the floor base plate, and ceiling top plate. In the event of aggressive use, we recommend screwing the ceiling top plate to wood studs to provide an additional level of security.

The load rating of the SuperPole with SuperBar is based on the user’s weight, but it is not intended to support an individual’s entire full body weight. Our research has shown that the amount of lateral force generated by an individual pulling from a sit to stand position will typically be considerably less than their actual weight (i.e 5-30% during a sit-to-stand motion). Depending on which floor-to-ceiling grab bar is purchased, the weigh capacity is either 300lbs or 450lbs